


Grupsa have been innovating for more than fifty years to offer the best solutions for building entrances. We design, manufacture and install automatic door systems for hotels, shopping centers, hospitals, offices, transportation centers all over the world to offer the most adjusted products for requirements of each project.
CLEAN SYSTEM – MODULAR OPERATING ROOMS AND CRITICAL AREAS
Clean System is our system of design, planning, construction and installation of Modular and Integrated Operating Rooms and Critical Areas (Intensive Care, ICU, Preanesthetic Areas, Clean Corridors, White Rooms …) in a scalable and personalized way with the latest equipment technologies and automation.
Our system allows the installation of a surgical area with reduced execution times as well as a long service life, due to its low maintenance cost and easy and convenient access to the facilities.
Our Clean System line includes:
- High strength and durability galvanized steel substructure.
- Wall panelling in Stainless Steel, High Pressure Antibacterial Laminate (HPL) or glass.
- Pressurized ceilings.
- Sliding or swing doors with hermetic closure and wide free passage for personnel and beds of our Hospital System range.
- Non-slip conductive vinyl floor.
- Climate System formed by HEPA filters (Laminar flow or Turbulent flow).
- Radiological Protection for Surgical Areas with diagnostic imaging.
- LED lighting.
- Control and Automation Systems.
HOSPITAL SYSTEM – SYSTEMS AND FACILITIES FOR OPERATING ROOMS AND WHITE ROOMS
A hospital System is a wide range of equipment and systems for the surgical block and isolated, clean rooms and critical areas of the Hospital. Our products are characterized by high quality raw material, reduced maintenance and easy cleaning.
This product line includes:
- Hermetic doors (sliding, swing and pivoting) for access to Surgical Block, Operating Theatres, Critical Areas and White Rooms, available in different materials (Stainless Steel, High Pressure Antibacterial Laminate, HPL, or glazed) and options (with leaded protection, fire resistance , acoustic isolation…).
- Facilities for the surgical area (sash windows, transfer for the passage of materials, patient transfer, observation windows, etc.)
Our models are certified by the most demanding European regulations. Our hermetic doors have the Certificate of Hermeticity EN 12207 Class 4 that ensures a hermetic enclosure, which allows to improve the control over the pressure differential between the inside and outside of the operating room or surgical area.
SLIDING DOORS FOR INTENSIVE CARE UNITS (ICU) & ISOLATES
ICU SYSTEM
The Sliding Doors for Isolated & Intensive Care Units ICU System reserve the privacy and sound isolation of the patient. They allow medical monitoring by hospital staff of the Intensive Care Units, as well as segmented areas can be created for isolated patients or in the burn unit that require positive or negative pressure to avoid the crossing of pathogens.
- Optionally, ICU boxes allow the folding of the leaves to make bigger the space of passage for hospital beds
- Available with Venetian blinds for greater privacy, as well as automatic opening
- Elegant Design and Easy Cleaning
- Available Formats for Architects: PDF, BIM and CAD
Technical specifications
- Perfect for Isolated and Intensive Care Units, Resuscitation, Preanesthesia …
- Central or lateral sliding or telescopic opening
- Composition adaptable to the project
- Standard free passage width from 1000 to 1800 mm
- Silver anodized lacquered aluminum and Stainless Steel finishes
- Optional AG-90/90 operator for automatic opening
- Integrable venetian blind with orientation regulator
- Design and special dimensions on request
- Composed of two folding sheets and one fixed or four folding sheets
TECHNICAL HPL DOORS FOR HOSPITAL & CLINICS
The Technical Doors Kompak System made of High Pressure Laminate Panel (HPL) with antibacterial finish (according to JIS Z 2801 standard) are adapted to the needs of hospitals and clinics. Thanks to its compact design and versatility, it can be adapted to multiple hospital applications, such as consultation rooms, rooms, recovery rooms, laboratories or hospital radiology areas; but also to uses beyond health, such as morgues, schools or institutional buildings.
Our range of interior hpl doors are designed and manufactured in Spain under European regulations, consisting of two HPL sheets with a highly durable and resistant injected polyurethane core, aluminum frame and a smooth surface without moldings. They are highly resistant to humidity and impact according to the standard (CTE-DB-SB AE Class 4 & UNE-EN 41955 / 41955-2 Class 4), allowing a low maintenance cost and a long product life.
- Highly resistant to impact according to European regulations
- Low maintenance cost and long durability
- High customization and wide catalog of optional elements, visor dimensions, opening automation and availability for radiology.
Technical specifications
- Standard clear passage widths from 620 to 2950 mm, with single, double or unequal leaves.
- Standard finishes in six colors.
- Technical doors with concealed hinges.
- Stainless steel handles.
- Different types of visors (dimensions, shape …).
- Protection for hospital beds up to 400 mm high.
- Grupsa AGB operator automatic opening.
- Lead protection for radiology rooms.
- Design and special dimensions on request.
ROTARY SYSTEM – REVOLVING DOORS
The Rotary System range is made up of Revolving Door Systems, in manual or automatic version, designed to adapt to installations with high traffic of people as hotels, offices or shopping centers. Seven different models of revolving doors, which allow us to adapt to all needs while maintaining the functionality and elegance that characterize these doors, which provide a unique, differentiating and sophisticated entrance even before entering the building.
A total solution with extensive customization possibilities for your installation:
- Grupsa’s design for these revolving doors is based on the most advanced technology.
- Revolving doors is subject to compliance with current local and European regulations.
- It has the possibility of being installed on evacuation routes, thanks to its door leaves folding system.
The revolving doors of the Rotary System range provide compliance with the EN 16005 standard, based on the conditions and requirements of use of the installation. They provide solutions aimed at improving user safety, energy saving costs and the management systems of the BMS building. They minimize air leakage in buildings acclimatized with air conditioning or heating, which results in considerable energy savings due to the thermal and acoustic insulation they provide.
Technical specifications
- Available in three or four door leaves
- Diameters up to four meters wide
- Heights up to four meters
- Door leaves folding system for evacuation systems
- Finishes in multiple finishes: Stainless Steel, Aluminum, Bronze, Copper …
- Manual or automatic operation
MODELS
SCREEN SYSTEM
PLATFORM SCREEN DOORS (PSD) FOR METRO, TRAIN, BUS (BRT) AND TRAM
Screen System is our range of Platform Automatic Door Systems for Mass Transportation Terminals: bus (BRT), metro, tram and train. Through glazed screens that separate the platform from the tracks, the platform doors open only when the vehicle is properly parked. This ensures efficient, fast and safe use in subway, tram or bus stations, avoiding falls or trips.
- Guarantees user safety, allows greater use of the platform and optimizes the passage of travelers.
- Improves the energy efficiency of the station, since you optimize the air conditioning.
- Easy maintenance and long product life.
- Complies with international standards for train level SIL 3 and SIL 4.
Its GRUSCADA control and monitoring system allows to manage remotely and in real time the openings, the state and the maintenance needs of all doors. Different types:
The PSD (Platform Screen Doors) systems are glazed floor-to-ceiling screens based on automatic sliding doors that synchronize with the vehicle when it is properly parked, guaranteeing the safety of the users.
APG Platform Systems (Automatic platform doors) are automatic doors based on medium height screens (up to 1.7 m) that synchronize with the vehicle when it is properly placed.
MODELS
AUTOMATIC SYSTEM
GLAZING AUTOMATIC DOORS
The range of Glazing Sliding Doors, Automatic System, is Grupsa’s integral solution for access to your building. Standard openings greater than four meters clear wide passage and up to three meters clear height. Grupsa access door systems meet the most demanding needs in terms of energy efficiency, functionality, evacuation, safety and aesthetics; as well as in compliance with the strictest European regulations (EN 16005). They can incorporate a high degree of exterior insulation for noise, dust and temperature.
From Grupsa Door Systems we offer several models with panic systems, which allow the folding in the direction of evacuation not only of the door leaves, but also of the fixed leaves, by means of a hidden pivot system. Also our models of automatic doors optionally have the ER operator for escape routes without panic option, which has a motorized emergency opening battery, which guarantees the maneuver of the door in case of power failure. They also incorporate dual technology detection sensors for activation and safety, safety photocells, emergency buttons and access control.
- Designed and manufactured in one or two simple or telescopic sliding door leaves.
- Eight different profiles to meet all needs: from robust doors for entrances with a lot of traffic to doors .without profiles for the most aesthetic access.
- Maximum safety, according to the most demanding European regulations (EN 16005).
- Plans available in PDF, CAD and BIM (Revit).
Technical specifications
- Different standard compositions: a movable door leaf; a movable door leaf and a fixed panel; two movable door leaves; or two movable leaves and two fixed panel.
- Standard clear passage widths from 800 to 6000 meters for the most demanding access.
- Finishes in Stainless Steel, aluminum – lacquered or anodized -, copper, bronze and brass.
- Maximum weights of up to 150 kg / door leaf.
- Wide range of safety and activation devices.
- Design and special dimensions upon request.
MODELS
CIRCULAR SYSTEM
CURVED SLIDING DOORS
The range of Curved Sliding Doors, Circular System, consists of fixed and mobile panel systems that, due to their configuration, form very attractive enclosures for main building entrances. It is an intermediate solution between straight automatic sliding doors and revolving doors, when the front of the building is curved or you want to shape the entrance of the installation in a careful and elegant way.
The CS-800 Curved Sliding Doors can be manufactured under any specific configuration and in different surface finishes, acting as an effective windbreak when extended with fixed side panels. Wide versatility: circular or semicircular, ellipses, concave or convex, or single or double leaf.
- Maximum safety, in accordance with the strictest European regulations (EN 16005)
- Available for evacuation routes, thanks to its AG90 ER curved operator.
Technical specifications
- Standard free passage widths from 800 to almost 2000 mm
- Standard diameters greater than 4 meters
- 81 x 35 mm and 70 x 26 mm profiles
- Finishes in stainless steel or aluminum – lacquered or anodized.
- Maximum weights of up to 150 kg / sheet.
- Wide range of safety and activation devices.
- Design and special dimensions upon request.
MODELS
BALANCE SYSTEM
AUTOMATIC BALANCED DOORS
The Balanced Doors from the Balance System range are an option for heavy traffic, interior areas or exterior accesses with wind currents. Our AGB operator for tilt-and-turn doors holds the door under tension to ensure easy, elegant opening and secure closing for users.
In compliance with the strictest European safety regulations (EN 16005), the BS-900 model of tilt-and-turn doors adapts to narrow entrances or corridors that require the maximum width of passage. It is made of aluminum, with multiple finishes to be able to be customized to the aesthetics of the building. In addition, the balanced doors are prepared for power outages, as they optionally include a backup battery that guarantees operation even if they may momentarily lack power.
- Perfect for narrow corridors or entrances that need a wide passage width.
- Safety, reliability and low maintenance cost.
- Reinforced protection thanks to safety sensors and anti-pinch protection between door leaves.
Technical specifications
- Standard Clear Widths from 700 to almost 2,800 mm
- Robust and resistant profiles
- Aluminum finishes – lacquered or anodized.
- Wide range of safety and activation devices.
- Design and special dimensions on request.
MANUAL SYSTEM
PIVOTING DOORS FOR OPENING AUTOMATIC OR MANUAL
The Manual System product range is composed of Pivoting Doors with manual or automatic opening, for access to buildings, offices… Also recommended for interior office use or for integration with emergency doors on facades. They can be automated, incorporating the Grupsa AGB Operator. The range consists of seven models, whose designs vary depending on the type of profiles, the material and the configuration of the sheets, being able to adapt to different building typologies or to the specifications of the building. architectural project.
- Long durability and resistance in the exterior accesses of buildings
- Personalization and corporate identity
- Wide range of designs, materials and finishes
Technical specifications
- Standard free passage widths from 800 to 2000 mm for the most demanding access.
- Finishes in stainless steel, aluminum – lacquered or anodized -, copper, bronze and brass.
- Glasses of different thicknesses and specificities.
- Optionally, they can incorporate the automatic opening AGB operator.
- Wide range of safety and activation devices.
- Design and special dimensions upon request.
MODELS
Pivoting Doors
MS-300 Basic
Pivoting Doors
MS-300 Frame
Pivoting Doors
MS-400
Pivoting Doors
MS-606
Pivoting Doors
MS-615
Pivoting Doors
MS-630
Pivoting Doors
MS-700