Inkemaspecializes in providing integrated solutions for loading and unloading goods and for access-control through industrial enclosures. Our highly qualified team, with over 35 years experience in the sector, designs and produces for our entire product range: loading bays, scissor lift tables, yard ramps and dock shelters, among others.

Loading Bays

The system of loadingbays and unloading equipment is a very important point in anyeconomic sector. For this reason, Inkema develops increasingly innovative solutions to
fully equip the loading bays with maximum safety and speed for the vehicles but alsoachieves remarkable expense savings.
Inkema loading bays are solutions designed to accurately compensate for the difference
in height between the surfaces of the different trucks and the loading dock levellers. In
this way, the truck can be loaded or unloaded in one horizontal movement.
Inkema also supplies different constructive systems. After conducting a previous study, we
offer the best solutions for each type of construction, installation and loading bay.
Inkema has a wide range of loading solutions to cater to diverse needs.
The Perfect Combination of Speed, Functionality and Safety
Our loading bays can be separated into three categories:

  • RH11: Embedded Pit type. Dock leveller for those who want to start with a pit and a sub-frame.
  • RH12: Self-hanging type. Dock leveller for those who prefer to install the leveller in a pit without a sub-frame.
  • RH13: Box Model without letter box. Dock leveller for those who do not want a pit.
  • RH14: Dock leveller with a specific height specially designed for the transport. The space inside the trucks is optimised, thus reducing the cost of transportation.

Hinged Lip Dock Leveller

The variety of truck heights and loading bays make dock levellers inevitable. These are the most practical and safest way to perform the loading and unloading process.
Without doubt, the Inkema RH1 is the perfect solution for any loading bay. Its hydraulic tilting mechanism and hinged lip enables the dock leveller to cover the gap and height between the loading bay and the truck, allowing it to rest firmly on the loading bay.
Suitable for installation in any loading bay
We can find The Following Types Of Hinged Lip Dock Leveller:
  • RH11: Embedded Pit type. Dock leveller for those who want to start with a pit and a sub-frame.
  • RH12: Self-hanging type. Dock leveller for those who prefer to install the leveller in a pit without a sub-frame.
  • RH13: Box Model without letter box. Dock leveller for those who do not want a pit.
  • RH14: Dock leveller with a specific height specially designed for the transport. The space inside the trucks is optimised, thus reducing the cost of transportation.

Retractable Lip Dock Levellers

The dock levellers with telescopic lip allow you to adapt to all loading and unloading situations. Thanks to the lip’s retractable movement, the truck does not have to be centred in the dock.
With these dock models you have longer platforms with a place in shorter loading bays.
They allow larger height differences between loading bays and truck platforms, as well as the distance between them.
At Inkema we manufacture two types of dock levellers with telescopic lip::
  • RH2: has a retractable lip of 500mm. Adapting perfectly to any loading bay.
  • RH3: has a retractable lip of 1.000 mm. Especially recommended for isothermal installations thanks to its perfect seal.
    The Inkema construction system concept is easy to explain: these systems are designed to satisfy
    anyone’s needs:
  • RH21/31: Embedded Pit type. For those who want to start with a pit and a sub-frame.
  • RH22/32: Self-hanging type. For those who prefer to install the leveller in a pitwithout a sub-frame.
  • RH23/33 Dock Levellers: For those who do not want a pit: Box Model without letter box.

Special Dock Levellers

The principal function of the Inkema R&D+i Department is to conduct research and create new products of the highest quality, to satisfy the needs of an increasingly demanding market.
At Inkema, we design and manufacture special dock levellers of all types, such as the 12-metre long dock leveller, the Dual SR leveller consisting of a combination of lifting table and hydraulic ramp, and many more specific for each customer.
Product of Special Dock Levellers

  • RH65 Yard Ramp
    The Inkema RH65 Yard Ramp is the most versatile leveller in the market. It is recommended for loading and unloading operations in industrial warehouses and premises with no dock facilities to allow the forklifts to reach the truck from ground level. Depending on the needs of each customer, they can be made in different lengths and with different loading capacities.

Free Standing Frames and Dock Houses

Inkema’s Free-standing frames and Dock Houses are designed specifically for each customer, to speed up the installation of a loading bay, improve the internal insulation of the warehouse and increase the storage capacity of the building.
In addition, Inkema has designed a standard solution for free-standing frames, levellers and dock houses: the All in One solution. A solution that is customised for each client, for extending loading points without having to execute any addition building work. The All in One solution is comprised of a free-standing frame and an integrated dock leveller. It is installed optimally and rapidly thanks to its compact design that combines bench and dock leveller. All All-in-One solutions are compliant with EU regulations.
Increasing the building’s storage capacity and minimising temperature losses.
Inkema isothermal benches and tunnels improve working conditions and goods handling thanks to their high thermal and hygienic insulation.
At Inkema, we have also designed new complete loading bay systems designed especially for cold installations: Inkema Cold Storage Systems.

Categories:

  • Free-standing Frame + Leveller (All in One)

    Inkema has developed a standard solution for free-standing frames, dock levellers and isothermal dock houses: the Hydraulic All in One Dock Leveller. A solution tailored to the customer who needs to expand their loading points and does not want to do additional work. All you have to do is decide its placement.

Categories:

  • The RH16 All in One Dock Leveller consists of a fully integrated free-standing frame and a hinged lip dock leveller. This solution is designed to ease the process of transport and installation.
  • The RH26 All in One Dock Leveller consist of a fully integrated free-standing frame and a telescopic lip dock leveller.

Dock Houses

The dock houses and free-standing frame system couples the building to the vehicle. The standard dock house roof is formed by a special anti-drip ribbed panel with a slope that prevents the accumulation of water and allowing rainwater to be drained into the drip tray at the front. Depending on each need, it can be supplied in different versions:
Structure only, for the customer to fit it to the façade.
Plate enclosure.
Sandwich panel.
Prefabricated concrete.
Optionally, a dock house can be added to improve energy savings and the thermal insulation between building and loading bay. There are several types of dock houses suitable for isothermal tunnels: retractable houses, fixed houses, façade mounted houses and inflatable houses.
Inkema isothermal tunnels improve working conditions and goods handling thanks to their high thermal and hygienic insulation.

The Perfect Solution.

Inkema has two types of isothermal tunnels for loading bays:
Túnel isotérmico estándar
Complying strictly with safety regulations.
Always aiming to meet the needs of our customers with the best possible price, we have designed the standard isothermal dock house.
This dock house we have designed has precise measurements: 2,580 mm in length, 3,400 mm in width and 3,660 mm in height. But we also we manufacture dock houses for loading bays of any size according to the demands of our customers.

Customized Dock House.

We design isothermal dock houses adapted to any kind of installation.
Because we know that not all customers are the same and each requires a different solution, our Technical Department studies each case in particular with the utmost rigour and professionalism.
As in the other dock houses, only the structure can be supplied for the customer to adapt it to its façade, in sandwich panel, prefabricated concrete or veneer cladding apart from being able to choose the colour that best suits the installations.

Cold Storage Systems

The process of loading and unloading goods at the loading bays is a very important point, especially for installations that require a high level of seal.
Therefore, Inkema has designed a set of 2 different Cold Storage Systems fully adaptable to any installation that requires it:
Cold Storage System with Telescopic Leveller
Cold Storage System with Loading Bridge

Product of Cold Storage Systems

  • Cold Storage System with Dock Leveller
  • Cold Storage System with Loading Bridge

Complete loading and unloading systems for the interior (PFIR) or exterior (PFER) of cold stores with high freight traffic. There are two different Cold Storage System with Inkema telescopic leveller specially designed for the loading and unloading of goods, one for interior and the other one for the exterior of any installation where a high level of tightness is required. Both systems are formed by:
  • a hydraulic leveller with telescopic lip
  • inner frontal isothermal insulation
  • steel bumpers
  • an inflatable shelter
  • an insulating sectional door

The only difference between both systems comes from the installation in external mode, which requires a free-standing frame and an isothermal dock house to act as an external loading bay.

Loading Bridges

Inkema loading bridges can be installed without the need for a pit, as they are designed for placing at the end of the loading bay. They are used to speed up the loading and unloading of medium-size and small goods.
More Lightweight and Practicable.
Aluminum catwalk | Inkema
Inkema loading bridges can be installed without the need for a pit, as they are designed for placing at the end of the loading bay. They are used to speed up the loading and unloading of medium-size and small goods. Depending on the model, they can be attached to the bay or moved laterally, thereby optimising the use of each unit. We also supply portable loading bridges that are easy to handle and appropriate for light loads.
Our folding loading bridges are manufactured in one piece and their aluminium or steel composition means that they contain no rusting elements.

The only difference between both systems comes from the installation in external mode, which requires a free-standing frame and an isothermal dock house to act as an external loading bay.

Categories:

  • Manual Aluminum Loading Bridges

 

Inkema’s manual aluminum loading bridges are ideal for safely overcoming small and medium height differences. They are made of a special aluminum alloy, which makes them very light in weight, very resistant to load and maintenance-free.
At Inkema we sell 4 types of aluminum loading bridges:
INKEMA Aluminum Loading Bridge PA51
INKEMA Aluminum Loading Bridge PA52
INKEMA Aluminum Loading Bridge PA53
INKEMA Aluminum Loading Bridge PA54

Manual Iron Loading Bridges

Inkema’s steel loading bridges are designed to be installed at the end of the loading bay in a fixed manner or can be moved laterally by a rail on two wheels, as is the case with the PA1 steel loading bridge.
We manufacture two types of manual steel loading bridges: the Inkema PA1/PA2 and the Minidock. Also, we manufacture a Hydraulic Loading Bridge PAHI with a nominal load capacity of 6 tons.
In the two categories, their main advantage is that they do not need any type of pit for their installation.

The only difference between both systems comes from the installation in external mode, which requires a free-standing frame and an isothermal dock house to act as an external loading bay.

Product of Manual Iron Loading Bridges

  • PA1 movable folding loading bridge and PA2 fixed folding loading bridge
  • Minidock
  • Hydraulic Loading Bridge PAHI

Scissor Lift Tables

Inkema Scissor Lift Tables cover the different logistics needs in most sectors: food, pharmaceuticals, vehicles, industrial, textile, etc. Just by looking at the Inkema Scissor Lift Tables you can tell it has everything you need: safety, functionality and efficacy.
The Inkema Scissor Lift Tables is comprised of a base on which the hydraulic equipment and articulated scissor mechanism rest. In turn, the top or working part of the table is articulated on those scissors. All designed and manufactured in accordance with European Community directives and in accordance with the above standard.

The only difference between both systems comes from the installation in external mode, which requires a free-standing frame and an isothermal dock house to act as an external loading bay.

Inkema divides its range of scissor lifts into three:

Single Scissor Lift Tables: Flat surface, with a single set of scissors and hydraulic cylinders.
Double Scissor Lift Tables: Designed to achieve greater elevation and/or a larger load surface. Consists of a flat surface, two sets of scissors and hydraulic cylinders. There are 3 different types:
  • Vertical (MEX2)
  • Twin (MEX3)
  • Tandem (MEX4)
Dual SR Scissor Lift Table: Set of machines in one. A hydraulic dock leveller with hinged lip (SR) or with telescopic lip (SRB) is installed on a lifting table.
Single, double, extra-flat Scissor lifts… Thanks to its broad experience, our R&D+i Department specialises in designing any table, no matter what its size, weight or functionality.

Dock shelters

Inkema dock shelters are designed to ensure important energy savings, as they maintain the heat inside the building, provide better interior hygiene and, thanks to their signaling system, facilitate the approach manoeuvres of the trucks, in all cases without affecting speed and flexibility in loading and unloading operations.
The dock shelter is formed by a perimeter structure that supports a set of canvas sheets which fit onto the body of the truck.

This structure is available in aluminum or it can be galvanized, and may be:

  • Retractable Dock Shelter
  • Inflatable Dock Shelter
  • Refrigerated Dock Seal
  • Façade Flush Dock Shelter
  • Fixed Dock Shelter
Flexibility and Savings Are No Longer Incompatible.
Optimal performance: All Inkema dock shelters offer different optional performances to allow customers to customize the shelter according to their needs and demands.
There are mainly three ranges for Inkema shelters: Variation of the projection of the shelter, height of the top canvas and the possibility of adding steel truck stops to the loading bay.
Are You Ready?

Start a New Project